FDA Regulations & You   no comments

Posted at 5:00 am in Uncategorized

Due to the FDA regulations that went into effect on August 8, 2016 we MUST implement these changes:

  • You MUST immediately show your ID if you appear to be under 30 years old. Online sales will have to go through third party age verification.
  • Samples
    CANNOT be FREE to a customer or employee. Sampling (in store) will cost
    $1 (+tax), with 100% of the proceeds to benefit SFATA (Smoke Free
    Alternatives Trade Association).

Shops will NOT be able handle your device.

  • Shops CANNOT prime, build, change or modify your coil in any manner.
  • Shops CANNOT take your tank off your device.
  • Shops CANNOT open your tank or your mod.
  • Shops CANNOT fill your tank.
  • Shops CANNOT update any device.
  • Shops
    CANNOT disassemble or assemble your device. Even disassembling our
    display model for you to see is a gray area. We will walk you through
    set up of your new device, however, we cannot be holding it to do so.

If we do any of those things we are considered to be a Tobacco Manufacturer, which we are NOT.

Shops may no longer mix e<a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid or add any additives, such as nicotine or flavorings to e<a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquids in-store.

Shops may not alter the original package of an item. Meaning:

  • Shops are not allowed to sell single coils.
  • Shops are not allowed to open bottles of <a href="http://www.vapininthecape.com/e<a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid_c_7.html”>juice.
  • Shops are not allowed to open boxed items.

Shops are no longer allowed to tell anyone that vaping helps
people quit smoking. We can not claim that it is safer than cigarettes
or that it is a tobacco harm reduction.

These regulations are as the industry understands them today. As with
any new regulation, things might change over the next few months.
Please be patient with us as we try to adapt to the regulations and as
the FDA sees fit to modify.

What can you do about this:

Support HB 2058 to change the date of which all products created after February 2007 are banned.

Written by vape on August 9th, 2016

Third Party Age Verification   no comments

Posted at 5:00 am in Uncategorized

With the new FDA regulations that went into effect yesterday (August
8th, 2016). we have implemented a third party age verification system. As frustrated as you probably are about this, trust me when I tell you that we are just as frustrated. The process is pretty straight forward, but we wanted to post this blog post to assist you with getting through it. Make sure you have your cell phone close by, because you will need it for the SMS verification part of the process.

Build your shopping cart like you normally would and when you get to the checkout, you will notice a new check box under the Terms and Conditions area.

Select the box that you agree that you are of legal age to purchase in your state (will be 18 or 21 depending on where you live). Once you have selected this box, it will launch the Age Verification system window (see the next section). If you don’t see the window come up, it is more than likely that you have a pop-up blocker enabled in your web browser. You should allow all pop-ups for http://www.vapininthecape.com

This is the Welcome screen of the Bluecheck Age Verification system. It is VERY important that you carefully read each screen as you continue through the steps. Each screen will explain clearly what information the system is looking for and the format it is looking for. Go ahead and click CONTINUE when you are ready to get started.

This is pretty self explanatory as they are just looking for your First name and Last name as it appears on your drivers license or other photo ID. After you have entered the required information, click CONTINUE to go to the next step.

This screen is requesting your Date of Birth. The format is Day first, then Month, then Year. After you have entered this, click CONTINUE. (Please note that if you are under the age of 27, there will be additional instructions for you to send a copy of your drivers licence)

This screen and the next have tripped some customers up. Pay close attention to the format they need your CELL phone number in. Do not use any dashes or parenthesis in your phone number and you do not need to put the number 1, just area code and phone number. After you have entered your phone number in the correct format, click CONTINUE.

VERY IMPORTANT – although the previous screen was asking for your cell phone number for SMS verification, this screen is asking for the last 4 numbers of your Social Security Number. After you have provided that, you will receive a text message with an SMS code. Many customers have been waiting for a text message from the previous step, but you have to provide the last 4 numbers from your SSN before they will send the text SMS. After you have entered your last 4 numbers, click CONTINUE and check your cell phone for a new message.

Enter the 4 digit code that was texted to you and click CONTINUE.

Congratulations! You have made it through the verification process successfully! At this point, you will be able to complete your purchase, and we will get it shipped right out to you.

So that is the process that you will have to do the first time. Every time after that, you will only need to enter your Full Name, Date of Birth, and the new SMS code they will send to you. Thank you so much for shopping with us and for your patience with these new regulatory changes.

Written by vape on August 9th, 2016

Battery not charging   no comments

Posted at 3:55 pm in Uncategorized

Hey guys, I just got my first e cig and I have a problem.
I got it as a gift from my friend and I started using it right away until the battery ran out. The problem comes when I try to charge it. I have an eGo-T. Whenever I plug the charger into my laptop the led is green. When I connect the battery it stays green. I think it's not making contact. I let it charge for 3 hours and the charger's led was green. When I tried to vape, the battery's led flashed blue like 9 10 times and no vapours…

Battery not charging

Written by vape on August 1st, 2016

Information required about Joyetech eGo AIO Box   no comments

Posted at 11:49 am in Uncategorized

I am intending to purchase joyetech eGo AIO Box Starter Kit. Can someone please tell me which site sells it at the lowest price, please also share the discount details like coupon code if any

Written by vape on July 29th, 2016

I’ve upgraded my ole Ego, how did I survive?   no comments

Posted at 4:42 pm in Uncategorized

I had the old ego c. Fish tank filter cutting, cartridge filling with tweezer old 650 pain in the butt. I quit the manuals withno prob, but vaping was a job.
I ordered the Ego AIO and the Ego ONE….SERIOUSLY easy, enjoyable…my fave of the two? The Ego ONE. Downfall is trying to see the <a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid, which on the AIO is so much easier.
vapor Beast had the best pricing.
So, I'm now in the 21st century. No more tweezers, filter cutting…life is good.
Thanks to all for your help in my…

I've upgraded my ole Ego, how did I survive?

Written by vape on July 24th, 2016

eGo AIO trick to avoid dry/burnt hits   no comments

Posted at 7:05 pm in Uncategorized

I have been using the AIO for a while now, and nothing is more aggravating than prematurely retiring a coil because its burnt. But I have found a simple solution for this, and have not had a burnt coil since. The trick is this: when you are getting a dry hit, blow INTO the mouthpiece to introduce more <a href="http://www.vapininthecape.com/e<a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid_c_7.html”>juice into the coil. The physics are there- When you blow into the tip, you are slightly compressing the air that is in the tank. When the air expands back to atmospheric, it forces some <a href="http://www.vapininthecape.com/e<a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid_c_7.html”>juice…

eGo AIO trick to avoid dry/burnt hits

Written by vape on July 16th, 2016

eGo-RS behaving strangely   no comments

Posted at 6:26 pm in Uncategorized

View attachment 576351

(I don't use a lanyard and I hate the naked look & feel around the firing button, so I glued on a bit of black rubber tubing)

Bought this oldie a few days ago (I understand the design is from around 2009 – no idea who manufactured this one) as new and unused. It seems to work fine, but has one strange habit.

When I take a puff and then stand it up (upright) on the table the firing button flashes 3x blue. This only happens…

eGo-RS behaving strangely

Written by vape on July 9th, 2016

eGO AIO   no comments

Posted at 11:22 pm in Uncategorized

Just picked one of these up and due to the fact that both coils were missing out of the factory sealed packaging I haven't been able to try this out yet. Anyone else that owns one like to chime in with their opinion on this device? I'd love to hear what others think about it. Good, bad or ugly.

Written by vape on July 1st, 2016

ego one mega v2 all compatible tanks?   no comments

Posted at 12:02 am in Uncategorized

Recently purchased the ego one mega v2 to find out it has leaking issues which are mentioned all over the web. Does anyone own one and managed to find a compatible tank that does not have leaking issues? Thank you.

Written by vape on June 30th, 2016

Is my Evic Vtc mini on it’s last legs?   no comments

Posted at 7:27 pm in Uncategorized

Recently, I feel my device hasnt been performing properly on temp control. I'm using SS wire in one of those ego one clr rba's and i've always built the same way. But the last week or so it has taken me ages to get it to perform correctly. For example, I'm having constant problems with hot spots and hot legs on the coil, the coil not reading the resistance properly, and also a lot of the time I'll have the mod set at 500F and 60W and the device will only fire at maybe 5w resulting in no…

Is my Evic Vtc mini on it's last legs?

Written by vape on June 28th, 2016